Read Arnav Rastogi's work in technology.
View all 481 articles
Some deep-ocean areas contain mineral-rich nodules resting on or near the seabed. Collecting them requires machinery that works far below the surface and a system for bringing material upward. The technical challenge…
Read article
A maglev vehicle can travel without relying on ordinary wheel contact for its main high-speed support. Magnetic fields provide suspension and, in many designs, guidance and propulsion. The technology is as much about…
Read article
Traffic can change faster than a fixed timetable anticipates. A signal plan that works on an ordinary morning may be less useful during an event or an unexpected disruption. Adaptive signal control uses measurements…
Read article
A large power project can be difficult to build and finance all at once. Small modular reactors, or SMRs, propose a different scale and manufacturing approach. The central idea is to combine a smaller reactor unit…
Read article
A smell usually contains more than one chemical, and identifying it is not always a matter of measuring a single substance. An electronic nose combines several responsive sensors with analysis of their collective…
Read article
A physical button gives a finger a clear sensation when it moves. A flat touchscreen may provide little physical evidence that an action registered. Haptic feedback adds a designed tactile response, allowing an…
Read article
Fermentation is familiar from foods such as yogurt and bread. Precision fermentation uses microorganisms for a more targeted manufacturing task: producing a selected ingredient. For alternative proteins, that can…
Read article
A brain–computer interface, or BCI, uses measured neural activity to help produce an external result, such as a communication output or a control command. The idea is compelling, but its capabilities are more…
Read article
A cochlear implant connects a sound-processing system with an implanted electrode arrangement. Its aim is to provide useful sound information through electrical stimulation. Understanding the signal path helps…
Read article
An MRI scanner produces detailed pictures of internal structures without using an X-ray beam. Magnetic resonance imaging combines strong magnetic fields, radiofrequency energy, signal detection, and computation. The…
Read article
A building normally follows the movement of the ground beneath it. Seismic base isolation changes that connection. Special components near the base support the structure while allowing controlled relative motion,…
Read article
A droplet hanging in midair can look like a trick. In acoustic levitation, a carefully arranged sound field supplies forces that can support a small sample. The technique is interesting because the sample can be…
Read article
The ground can hide layers, cavities, and other features that are difficult to inspect from above. Ground-penetrating radar, or GPR, sends electromagnetic energy into the subsurface and records returning signals. It…
Read article
Could a digital archive be stored in manufactured molecules instead of disks or tape? DNA data storage encodes information using the sequence of DNA bases. It is an archival research approach that connects computing…
Read article
A laboratory experiment often involves tubes, containers, and carefully measured liquids. Microfluidic devices shrink some of those operations into tiny channels and chambers. A lab-on-a-chip system can guide small…
Read article
How can a microscope measure the height of features too small to see directly? Atomic force microscopy, or AFM, uses a sharp probe to sense a surface. Its measurement is based on forces and movement, making it a…
Read article
A material’s visible surface does not reveal all of its important structure. Electron microscopy uses interactions between electrons and a specimen to examine details at much smaller scales. The resulting image can…
Read article
Water can gradually wear away stone. An abrasive waterjet accelerates that general idea into a controlled manufacturing process. A narrow stream carries abrasive particles that remove material along a programmed path.
Read article
Joining metal requires carefully controlled energy. Laser welding supplies that energy with a focused beam of light. The approach can create a narrow weld, but its usefulness depends on how the beam interacts with…
Read article
A drop of water can spread into a film on one surface and remain almost spherical on another. Superhydrophobic surfaces push this second behavior to an extreme. Their chemistry and fine texture can make water…
Read article
A bent piece of metal usually stays bent. Some alloys can recover a previously established shape when heated through a suitable temperature range. Shape-memory alloys use changes in internal crystal structure to turn…
Read article
A small concrete crack can become a pathway for water and other substances. Repairing every developing crack from the outside is difficult. Self-healing concrete research asks whether a material can contain an…
Read article
An aerogel can look like a pale, almost weightless piece of solid smoke. Its unusual appearance comes from a solid framework surrounding a great deal of empty space. That structure makes aerogels interesting when…
Read article
Metal usually brings to mind a dense sheet or a solid block. A metal foam contains many pores, giving it a structure that can behave very differently. Engineers use that internal space to pursue lighter components,…
Read article
Food scraps and manure contain material that microorganisms can break down. In an anaerobic digester, that process happens without oxygen inside an engineered system. The result can include useful gas and a residual…
Read article
Watching a buoy rise and fall makes the energy in waves easy to notice. Turning that motion into useful electricity is more difficult. A wave-energy converter must capture irregular movement, turn it into a…
Read article
A wind turbine needs a stable foundation, but what happens when the seabed is far below the surface? Floating offshore wind places the turbine on a buoyant structure held in position by mooring lines. The design…
Read article
Ice absorbs heat while melting even though its temperature changes little during the transition. Engineers can use the same general principle with materials selected for other temperature ranges. Phase-change thermal…
Read article
A window can provide a pleasant view in the morning and uncomfortable glare in the afternoon. Electrochromic glazing lets a building change how much light passes through the glass. It brings the window itself into…
Read article
A building can be well insulated and still need a planned supply of outdoor air. Bringing that air indoors can increase heating or cooling demand. Heat-recovery ventilation addresses the problem by exchanging thermal…
Read article
When a pot warms on an induction cooktop, where does the heat begin? The answer is inside compatible cookware. Instead of first heating a flame or a glowing surface, induction uses an electromagnetic field to make…
Read article
How can a machine take heat from outdoor air when the weather feels cold? A heat pump uses a powered refrigeration cycle to move thermal energy from one place to another. Understanding that movement explains both its…
Read article
A radio dial traditionally suggests one station at one frequency. Digital Audio Broadcasting, or DAB, organizes things differently. It can combine several services into a shared transmission and let a receiver select…
Read article
What if a radio could change much of its behavior without replacing a collection of dedicated circuits? Software-defined radio, often shortened to SDR, moves signal-processing tasks into software. It makes a radio…
Read article
A phone streaming video and a business sending time-sensitive information use the same basic mobile network, but their needs can be very different. Network slicing gives an operator a way to organize those needs into…
Read article
Why does a television in a busy public room sometimes have pictures but no useful sound? Turning up a speaker can disturb everyone else. Bluetooth LE Audio offers another approach: send the sound to compatible…
Read article
Why does a connection work well in one room and poorly in another? A wireless network is a physical arrangement as well as a name in a device's settings. Mesh Wi-Fi uses multiple connected points to distribute access…
Read article
Knowing that a device is connected does not tell us precisely where it is. Ultra-wideband, or UWB, can supply another kind of information: distance and position derived from radio measurements. That capability can…
Read article
A barcode usually has to be visible to a scanner. What if a system needs to identify a tagged object through a radio exchange instead? Radio-frequency identification, or RFID, links an electronic tag with a reader.…
Read article
Placing a device on a charging pad can feel like removing the connection entirely. In reality, the connection has changed form. Wireless charging uses an electromagnetic arrangement to transfer energy across a gap,…
Read article
A photographed page can be easy to read and still be difficult for a computer to search. The image records the appearance of the words, while a searchable text file records the characters themselves. Optical…
Read article
A webpage can request text, pictures, and other resources at the same time. What happens when one part of the transfer encounters a delay? Internet transport protocols determine how data travels between applications…
Read article
Why can a message contain English, Arabic, and an emoji without requiring three separate programs? Digital text depends on rules that identify characters consistently. Unicode supplies a shared foundation for those…
Read article
Can an app built from a website still be useful when the internet connection disappears? A progressive web app, or PWA, can combine web technology with features people associate with installed applications. The…
Read article
Have you ever opened a folder containing files called final, final-new, and final-really-new? Those names try to record a project's history, but they rarely explain what changed or why. Git offers a more structured…
Read article
What happens if a program finishes half of an update and then stops? A database might contain one change without another change that was supposed to accompany it. Transactions address this problem by grouping…
Read article
Why does an application work on one computer and fail on another? Its code may be identical, while the programs and libraries around it differ. Software containers address part of this problem by giving an…
Read article
How can a smaller file contain exactly the same information as a larger one? The answer is often about representation. Lossless compression replaces a sequence of data with a more compact description that a…
Read article
Can a message arrive correctly even when some of its bits are damaged? Digital communication depends on signals that travel through imperfect conditions. Error-correcting codes add carefully designed information to a…
Read article
What happens between typing a website name and seeing its first page? The name feels like an address, but the computers carrying the request need another kind of information. The Domain Name System, usually called…
Read article